This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ==== pendejo ==== * RAM: 2x 16G DDR4 * CPU: Intel(R) Core(TM) i7-9700 CPU 8cores * GPU: NVIDIA [GeForce RTX 4090] 16GB DDR5 2021/12/10 (OUTOFDATE) <code> $ inxi -Fxmt System: Host: pendejo Kernel: 5.15.6-100.fc34.x86_64 x86_64 bits: 64 compiler: gcc v: 2.35.2-6.fc34 Desktop: Cinnamon 5.0.7 Distro: Fedora release 34 (Thirty Four) Machine: Type: Desktop System: Micro-Star product: MS-7B18 v: 1.0 serial: N/A Mobo: Micro-Star model: MAG Z390 TOMAHAWK (MS-7B18) v: 1.0 serial: JC16321874 UEFI-[Legacy]: American Megatrends v: 1.60 date: 08/21/2019 Battery: Device-1: hidpp_battery_0 model: Logitech MX Keys Wireless Keyboard charge: 50% (should be ignored) status: N/A Memory: RAM: total: 31.28 GiB used: 8.77 GiB (28.0%) Array-1: capacity: 64 GiB slots: 4 EC: None max-module-size: 16 GiB note: est. Device-1: ChannelA-DIMM0 size: No Module Installed Device-2: ChannelA-DIMM1 size: 16 GiB speed: 2933 MT/s type: DDR4 Device-3: ChannelB-DIMM0 size: No Module Installed Device-4: ChannelB-DIMM1 size: 16 GiB speed: 2933 MT/s type: DDR4 CPU: Info: 8-Core model: Intel Core i7-9700 bits: 64 type: MCP arch: Kaby Lake note: check rev: D cache: L2: 2 MiB flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 48000 Speed: 800 MHz min/max: 800/4700 MHz Core speeds (MHz): 1: 800 2: 800 3: 800 4: 800 5: 800 6: 800 7: 800 8: 800 Graphics: Device-1: NVIDIA GP104 [GeForce GTX 1070] vendor: Micro-Star MSI driver: nouveau v: kernel bus-ID: 01:00.0 Display: server: X.Org 1.20.11 driver: loaded: modesetting unloaded: fbdev,vesa resolution: 1920x1080~60Hz OpenGL: renderer: llvmpipe (LLVM 12.0.1 256 bits) v: 4.5 Mesa 21.1.8 direct render: Yes Audio: Device-1: Intel Cannon Lake PCH cAVS vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 Device-2: NVIDIA GP104 High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus-ID: 01:00.1 Sound Server-1: ALSA v: k5.15.6-100.fc34.x86_64 running: yes Sound Server-2: PulseAudio v: 14.2-rebootstrapped running: no Sound Server-3: PipeWire v: 0.3.40 running: yes Network: Device-1: Intel Ethernet I219-V vendor: Micro-Star MSI driver: e1000e v: kernel port: N/A bus-ID: 00:1f.6 IF: eno1 state: up speed: 1000 Mbps duplex: full mac: 00:d8:61:dd:2d:a1 Device-2: Intel I211 Gigabit Network vendor: Micro-Star MSI driver: igb v: kernel port: 3000 bus-ID: 04:00.0 IF: enp4s0 state: down mac: 00:d8:61:dd:2d:a0 IF-ID-1: virbr0 state: down mac: 52:54:00:08:3e:23 Drives: Local Storage: total: 5.91 TiB used: 1.41 TiB (23.8%) ID-1: /dev/nvme0n1 vendor: Kingston model: SA2000M8500G size: 465.76 GiB temp: 25.9 C ID-2: /dev/sda vendor: Samsung model: SSD 860 QVO 2TB size: 1.82 TiB temp: 28 C ID-3: /dev/sdb vendor: Seagate model: ST3000DM008-2DM166 size: 2.73 TiB temp: 18 C ID-4: /dev/sdc vendor: Samsung model: SSD 870 QVO 1TB size: 931.51 GiB temp: 21 C Partition: ID-1: / size: 95.62 GiB used: 33.01 GiB (34.5%) fs: ext4 dev: /dev/nvme0n1p3 ID-2: /boot size: 975.9 MiB used: 354.8 MiB (36.4%) fs: ext4 dev: /dev/nvme0n1p1 ID-3: /home size: 1.79 TiB used: 1.38 TiB (76.9%) fs: ext4 dev: /dev/sda1 Swap: ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) dev: /dev/nvme0n1p2 ID-2: swap-2 type: zram size: 8 GiB used: 0 KiB (0.0%) dev: /dev/zram0 Sensors: System Temperatures: cpu: 27.8 C pch: 25.0 C mobo: N/A gpu: nouveau temp: 25.0 C Fan Speeds (RPM): N/A gpu: nouveau fan: 1103 $ lsblk NAME SIZE FSTYPE LABEL MOUNTPOINT UUID MODEL SERIAL STATE TYPE sda 1.8T Samsung_SSD_860_QVO_2TB S4CYNF0M522539H running disk └─sda1 1.8T ext4 homeqvo2tb /home 4b5090e6-4431-42f6-a2c6-4f00f607daab part sdb 2.7T ST3000DM008-2DM166 Z504D97L running disk └─sdb1 2.7T ntfs barracuda 7A20E59F20E5629D part sdc 931.5G Samsung_SSD_870_QVO_1TB S5SVNG0N908994M running disk ├─sdc1 600M ntfs Réservé au système 565E7B965E7B6D9D part └─sdc2 930.9G ntfs System 220081BC00819805 part sr0 1024M ATAPI_DVD_A_DH16A6L-C 369920415532 running rom zram0 8G [SWAP] disk nvme0n1 465.8G KINGSTON SA2000M8500G 50026B7683B4C91A live disk ├─nvme0n1p1 1G ext4 linboot /boot 8295711b-4cf6-4840-acca-de0d64a56f51 part ├─nvme0n1p2 4G swap [SWAP] fe00a8c3-a856-43f9-9d04-ca4e561fef5d part ├─nvme0n1p3 97.7G ext4 fedora / f7f1f398-2112-4d94-b144-2035358e1f03 part ├─nvme0n1p4 1K part ├─nvme0n1p5 9.8G ext4 home 72b32049-e238-47d2-b032-5cc3e3500984 part └─nvme0n1p6 97.7G ext4 debian 6c2b6fdd-1ccb-407a-9cb1-5bfffaaef87a part </code> Replaced sdc1 by nvme crucial p3plus 4TB. MBR does not support patritions larger than 2TB → cloned the disk in win10 through free software. Then used, in shell, mbr2gpt. Afterward, the bootloader had to be installed (booted only with grub) : <code> diskpart DISKPART> list disk → disk 4 as in the disk management GUI from computer management mbr2gpt /validate /disk:4 /allowFullOS → OK mbr2gpt /convert /disk:4 /allowFullOS diskpart DISKPART> select disk 4 DISKPART> list partition DISKPART> select partition 2 (the one with the system) DISKPART> active (set as bootable partition) DISKPART> exit bcdboot c:\windows </code> Then in the BIOS, set boot mode to UEFI. sources: https://www.libe.net/uefi-boot and https://social.technet.microsoft.com/Forums/Lync/en-US/0ca88e19-0929-4b23-a617-5bd7b84756ef/rebuild-bcd-bootrec-rebuildbcd-is-not-working-cboot-path-not-found Disks as of 2023/02/17 <code> NAME SIZE FSTYPE LABEL MOUNTPOINT UUID MODEL SERIAL STATE TYPE sda 1.8T Samsung SSD 860 QVO 2TB S4CYNF0M522539H running disk └─sda1 1.8T ext4 homeqvo2tb /home 4b5090e6-4431-42f6-a2c6-4f00f607daab part sdb 2.7T ST3000DM008-2DM166 Z504D97L running disk └─sdb1 2.7T ntfs barracuda 7A20E59F20E5629D part sdc 465.8G Samsung SSD 750 EVO 500GB S36SNWCH706887L running disk └─sdc1 465.8G ext4 ssdext500 /run/media/barriot/ssdext500 859a1b5a-aa95-4b2f-bbb7-84a295d25910 part sr0 1024M ATAPI DVD A DH16A6L-C 369920415532 running rom zram0 8G [SWAP] disk nvme0n1 465.8G KINGSTON SA2000M8500G 50026B7683B4C91A live disk ├─nvme0n1p1 1G ext4 linboot /boot 8295711b-4cf6-4840-acca-de0d64a56f51 part ├─nvme0n1p2 4G swap [SWAP] fe00a8c3-a856-43f9-9d04-ca4e561fef5d part ├─nvme0n1p3 97.7G ext4 fedora / f7f1f398-2112-4d94-b144-2035358e1f03 part ├─nvme0n1p4 1K part ├─nvme0n1p5 9.8G ext4 home 72b32049-e238-47d2-b032-5cc3e3500984 part └─nvme0n1p6 97.7G ext4 debian 6c2b6fdd-1ccb-407a-9cb1-5bfffaaef87a part nvme1n1 3.6T CT4000P3PSSD8 2244E68115E8 live disk ├─nvme1n1p1 600M ntfs Réservé au système 565E7B965E7B6D9D part ├─nvme1n1p2 930.8G ntfs System 220081BC00819805 part ├─nvme1n1p3 100M vfat CE66-F01B part └─nvme1n1p4 2.7T ntfs cru_4TB_data F05878405878079C part </code> ==== b3 asus ==== * CPU i5-1135G7 4core * RAM : 8GB + 32GB * SSD: 4TB crucial P3 2023/09/27 (OUDATED) <code> Machine: Type: Convertible System: ASUSTeK product: ASUS EXPERTBOOK B3402FEA_B3402FEA v: 1.0 serial: NCNXLPCZR00J526 Mobo: ASUSTeK model: B3402FEA v: 1.0 serial: N518NXLP0009H9MB UEFI: American Megatrends LLC. v: B3402FEA.307 date: 11/03/2022 Battery: ID-1: BAT0 charge: 43.8 Wh (88.0%) condition: 49.8/50.1 Wh (99.3%) volts: 11.9 min: 11.9 model: ASUSTeK B3402FEA status: discharging Device-1: hid-0018:04F3:2EC1.0002-battery model: ELAN9009:00 04F3:2EC1 charge: N/A status: N/A Memory: RAM: total: 7.46 GiB used: 1.35 GiB (18.1%) Array-1: capacity: 32 GiB slots: 2 EC: None max-module-size: 16 GiB note: est. Device-1: Controller1-ChannelA-DIMM0 type: no module installed Device-2: Controller0-ChannelA type: DDR4 size: 8 GiB speed: 3200 MT/s CPU: Info: quad core model: 11th Gen Intel Core i5-c bits: 64 type: MT MCP arch: Tiger Lake rev: 1 cache: L1: 320 KiB L2: 5 MiB L3: 8 MiB Speed (MHz): avg: 1903 high: 2400 min/max: 400/4200 cores: 1: 1258 2: 2400 3: 2400 4: 893 5: 2400 6: 2400 7: 2400 8: 1080 bogomips: 38707 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: Intel TigerLake-LP GT2 [Iris Xe Graphics] vendor: ASUSTeK driver: i915 v: kernel arch: Gen-12.1 bus-ID: 0000:00:02.0 Device-2: IMC Networks USB2.0 HD UVC WebCam type: USB driver: uvcvideo bus-ID: 3-7:3 Audio: Device-1: Intel vendor: ASUSTeK driver: N/A bus-ID: 0000:00:05.0 Device-2: Intel Tiger Lake-LP Smart Sound Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 0000:00:1f.3 Sound Server-1: ALSA v: k6.0.7-301.fc37.x86_64 running: yes Sound Server-2: PulseAudio v: 16.1 running: no Sound Server-3: PipeWire v: 0.3.59 running: yes Network: Device-1: Intel Ethernet I219-V driver: e1000e v: kernel port: N/A bus-ID: 0000:00:1f.6 IF: eno1 state: down mac: 58:11:22:02:44:83 Device-2: MEDIATEK MT7921 802.11ax PCI Express Wireless Network Adapter vendor: AzureWave driver: mt7921e v: kernel bus-ID: 0000:57:00.0 IF: wlp87s0 state: down mac: 8a:a9:b9:dd:87:0a Bluetooth: Device-1: IMC Networks Wireless_Device type: USB driver: btusb v: 0.8 bus-ID: 3-10:4 Report: rfkill ID: hci0 rfk-id: 0 state: up address: see --recommends RAID: Hardware-1: Intel Volume Management Device NVMe RAID Controller driver: vmd v: 0.6 bus-ID: 0000:00:0e.0 Drives: Local Storage: total: 551.01 GiB used: 17.28 GiB (3.1%) ID-1: /dev/nvme0n1 vendor: Micron model: 2210 MTFDHBA512QFD size: 476.94 GiB temp: 45.9 C Swap: ID-1: swap-1 type: zram size: 7.46 GiB used: 0 KiB (0.0%) dev: /dev/zram0 Sensors: System Temperatures: cpu: 38.0 C mobo: N/A Fan Speeds (RPM): N/A </code> ==== spiti ==== * CPU i5-8250U 4core * RAM 16GB * SSD 2021/12/10 <code> $ inxi -Fxmt System: Host: spiti.ux410ua Kernel: 5.15.6-200.fc35.x86_64 x86_64 bits: 64 compiler: gcc v: 2.37-10.fc35 Desktop: Cinnamon 5.0.7 Distro: Fedora release 35 (Thirty Five) Machine: Type: Laptop System: ASUSTeK product: UX410UAR v: 1.0 serial: K1N0CV12E181059 Mobo: ASUSTeK model: UX410UAR v: 1.0 serial: N0CV1904MB0114867 UEFI: American Megatrends v: UX410UAR.309 date: 04/16/2019 Battery: ID-1: BAT0 charge: 38.3 Wh (98.2%) condition: 39.0/48.3 Wh (80.6%) volts: 11.4 min: 11.4 model: ASUSTeK ASUS Battery status: Charging Memory: RAM: total: 15.5 GiB used: 9.33 GiB (60.2%) Array-1: capacity: 64 GiB slots: 4 EC: None max-module-size: 16 GiB note: est. Device-1: ChannelA-DIMM0 size: 8 GiB speed: spec: 2667 MT/s actual: 2400 MT/s type: DDR4 Device-2: ChannelA-DIMM1 size: No Module Installed Device-3: ChannelB-DIMM0 size: 8 GiB speed: 2400 MT/s type: DDR4 Device-4: ChannelB-DIMM1 size: No Module Installed CPU: Info: Quad Core model: Intel Core i5-8250U bits: 64 type: MT MCP arch: Kaby Lake note: check rev: A cache: L2: 1024 KiB flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 28800 Speed: 3300 MHz min/max: 400/3400 MHz Core speeds (MHz): 1: 3300 2: 3300 3: 3300 4: 3300 5: 3300 6: 3300 7: 3300 8: 3300 Graphics: Device-1: Intel UHD Graphics 620 vendor: ASUSTeK driver: i915 v: kernel bus-ID: 00:02.0 Device-2: Realtek USB2.0 HD UVC WebCam type: USB driver: uvcvideo bus-ID: 1-6:4 Display: x11 server: X.Org 1.20.11 driver: loaded: modesetting unloaded: fbdev,vesa resolution: 1920x1080~60Hz OpenGL: renderer: Mesa Intel UHD Graphics 620 (KBL GT2) v: 4.6 Mesa 21.2.5 direct render: Yes Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: ASUSTeK driver: snd_hda_intel v: kernel bus-ID: 00:1f.3 Sound Server-1: ALSA v: k5.15.6-200.fc35.x86_64 running: yes Sound Server-2: PulseAudio v: 15.0 running: no Sound Server-3: PipeWire v: 0.3.40 running: yes Network: Device-1: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel bus-ID: 02:00.0 IF: wlp2s0 state: up mac: 50:76:af:d1:47:e1 Bluetooth: Device-1: Intel Bluetooth wireless interface type: USB driver: btusb v: 0.8 bus-ID: 1-8:5 Report: bt-adapter ID: hci0 rfk-id: 7 state: down bt-service: enabled,running rfk-block: hardware: no software: yes address: 50:76:AF:D1:47:E5 Drives: Local Storage: total: 1.14 TiB used: 678.56 GiB (58.0%) ID-1: /dev/sda vendor: Samsung model: SSD 860 QVO 1TB size: 931.51 GiB temp: 35 C ID-2: /dev/sdb vendor: SK Hynix model: HFS256G39TND-N210A size: 238.47 GiB temp: 34 C Partition: ID-1: / size: 97.93 GiB used: 57.7 GiB (58.9%) fs: ext4 dev: /dev/sda5 ID-2: /boot size: 975.9 MiB used: 229.6 MiB (23.5%) fs: ext4 dev: /dev/sda2 ID-3: /boot/efi size: 189.8 MiB used: 13.9 MiB (7.3%) fs: vfat dev: /dev/sda1 ID-4: /home size: 791.68 GiB used: 620.63 GiB (78.4%) fs: ext4 dev: /dev/sda3 Swap: ID-1: swap-1 type: partition size: 25 GiB used: 0 KiB (0.0%) dev: /dev/sda6 ID-2: swap-2 type: zram size: 8 GiB used: 49.4 MiB (0.6%) dev: /dev/zram0 Sensors: System Temperatures: cpu: 71.0 C pch: 58.5 C mobo: N/A Fan Speeds (RPM): cpu: 3400 $ lsblk NAME SIZE FSTYPE LABEL MOUNTPOINT UUID MODEL SERIAL STATE TYPE sda 931.5G Samsung SSD 860 QVO 1TB S4CZNF0M254225K running disk ├─sda1 190M vfat qvoefi /boot/efi 3066-9FCA part ├─sda2 1G ext4 qvoboot /boot e6e13eef-8520-462b-9d3e-502854ac2e92 part ├─sda3 805.3G ext4 qvohome /home bea57599-f46c-4454-ad88-f4c9da04be0c part ├─sda4 1K part ├─sda5 100G ext4 qvosys / b0931976-39ba-4b56-9463-6b8ab4e4f61c part └─sda6 25G swap qvoswap [SWAP] 292916ef-4eef-48c4-88ca-75f5f65efda3 part sdb 238.5G HFS256G39TND-N210A EI8CN01911MA0CU1H running disk ├─sdb1 260M vfat SYSTEM 2077-DB95 part ├─sdb2 16M part ├─sdb3 237.4G ntfs OS CEEA7C64EA7C4AAB part └─sdb4 800M ntfs RECOVERY 7AFA1B9EFA1B562B part zram0 8G [SWAP] disk </code> ====opi5==== ====pi4==== <code> System: Host: pi4 Kernel: 4.19.57-v7l+ armv7l bits: 32 compiler: gcc v: 4.9.3 Desktop: N/A Distro: Raspbian GNU/Linux 10 (buster) Machine: Type: ARM Device System: Raspberry Pi 4 Model B Rev 1.1 details: BCM2835 rev: c03111 serial: <filter> CPU: Topology: Quad Core model: ARMv7 v7l variant: cortex-a72 bits: 32 type: MCP arch: v7l rev: 3 features: Use -f option to see features bogomips: 1080 Speed: 1500 MHz min/max: 600/1500 MHz Core speeds (MHz): 1: 1500 2: 1500 3: 1500 4: 1500 Graphics: Device-1: bcm2835-vc4 driver: vc4_drm v: N/A bus ID: N/A Device-2: bcm2835-hdmi driver: N/A bus ID: N/A Display: tty server: Fedora Project X.org 1.20.4 driver: fbdev unloaded: modesetting resolution: 1920x1080~60Hz OpenGL: renderer: llvmpipe (LLVM 6.0 128 bits) v: 3.3 Mesa 19.1.0-devel direct render: Yes Audio: Device-1: bcm2835-audio driver: bcm2835_audio bus ID: N/A Device-2: bcm2835-hdmi driver: N/A bus ID: N/A Sound Server: ALSA v: k4.19.57-v7l+ Network: Message: No ARM data found for this feature. IF-ID-1: eth0 state: down mac: <filter> IF-ID-2: wlan0 state: up mac: <filter> Drives: Local Storage: total: 14.75 GiB used: 5.60 GiB (38.0%) ID-1: /dev/mmcblk0 model: SD size: 14.75 GiB Partition: ID-1: / size: 14.20 GiB used: 5.56 GiB (39.2%) fs: ext4 dev: /dev/mmcblk0p2 ID-2: /boot size: 252.0 MiB used: 39.0 MiB (15.5%) fs: vfat dev: /dev/mmcblk0p1 Sensors: Message: No sensors data was found. Is sensors configured? Info: Processes: 126 Uptime: 3d 2h 21m Memory: 3.81 GiB used: 190.3 MiB (4.9%) Init: systemd runlevel: 5 Compilers: gcc: 8.3.0 Shell: bash v: 5.0.3 inxi: 3.0.32 </code> ====pi3==== ==== fic5 ==== * CPU i7-13800H 14core * RAM 64GB * GPU RTX 2000 Ada 8GB * SSD 1TB <code> System: Host: 063-LNX-05 Kernel: 6.15.9-101.fc41.x86_64 arch: x86_64 bits: 64 compiler: gcc v: 14.3.1 Desktop: Cinnamon v: 6.4.9 Distro: Fedora Linux 41 (Cinnamon) Machine: Type: Laptop System: Dell product: Precision 5480 v: N/A serial: FVCT9Y3 Mobo: Dell model: 0PFC28 v: A02 serial: /FVCT9Y3/CNCMK003A7004D/ UEFI: Dell v: 1.6.0 date: 09/14/2023 Battery: ID-1: BAT0 charge: 22.2 Wh (38.9%) condition: 57.0/70.6 Wh (80.7%) volts: 16.3 min: 15.4 model: BYD DELL CDTT239 status: charging Memory: System RAM: total: 64 GiB available: 62.4 GiB used: 17.8 GiB (28.5%) igpu: 64 MiB Array-1: capacity: 64 GiB slots: 8 modules: 8 EC: None max-module-size: 8 GiB note: est. Device-1: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s Device-2: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s Device-3: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s Device-4: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s Device-5: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s Device-6: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s Device-7: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s Device-8: Motherboard type: LPDDR5 size: 8 GiB speed: spec: 6400 MT/s actual: 6000 MT/s CPU: Info: 14-core (6-mt/8-st) model: 13th Gen Intel Core i7-13800H bits: 64 type: MST AMCP arch: Raptor Lake rev: 2 cache: L1: 1.2 MiB L2: 11.5 MiB L3: 24 MiB Speed (MHz): avg: 566 min/max: 400/5000:5200:4000 cores: 1: 566 2: 566 3: 566 4: 566 5: 566 6: 566 7: 566 8: 566 9: 566 10: 566 11: 566 12: 566 13: 566 14: 566 15: 566 16: 566 17: 566 18: 566 19: 566 20: 566 bogomips: 116736 Flags: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx Graphics: Device-1: Intel Raptor Lake-P [Iris Xe Graphics] vendor: Dell driver: i915 v: kernel arch: Xe bus-ID: 00:02.0 Device-2: NVIDIA AD107GLM [RTX 2000 Ada Generation Laptop GPU] vendor: Dell driver: nvidia v: 575.64.05 arch: Turing bus-ID: 01:00.0 Display: x11 server: X.Org v: 21.1.18 with: Xwayland v: 24.1.8 driver: X: loaded: modesetting,nvidia unloaded: nouveau dri: iris gpu: i915 resolution: 2560x1600~60Hz API: OpenGL v: 4.6 vendor: intel mesa v: 25.0.7 glx-v: 1.4 direct-render: yes renderer: Mesa Intel Iris Xe Graphics (RPL-P) API: EGL Message: EGL data requires eglinfo. Check --recommends. Info: Tools: api: glxinfo gpu: nvidia-settings,nvidia-smi x11: xdriinfo, xdpyinfo, xprop, xrandr Audio: Device-1: Intel Raptor Lake IPU vendor: Dell driver: intel-ipu6 bus-ID: 00:05.0 Device-2: Intel Raptor Lake-P/U/H cAVS vendor: Dell driver: sof-audio-pci-intel-tgl bus-ID: 00:1f.3 API: ALSA v: k6.15.9-101.fc41.x86_64 status: kernel-api Server-1: JACK v: 1.9.22 status: off Server-2: PipeWire v: 1.2.8 status: n/a (root, process) Network: Device-1: Intel Raptor Lake PCH CNVi WiFi driver: iwlwifi v: kernel bus-ID: 00:14.3 IF: wlp0s20f3 state: down mac: aa:c8:29:75:ef:cf Device-2: Realtek RTL8153 Gigabit Ethernet Adapter driver: r8152 type: USB bus-ID: 2-4.4.4:97 IF: enp0s13f0u4u4u4 state: up speed: 1000 Mbps duplex: full mac: ac:91:a1:d3:a2:c0 Bluetooth: Device-1: Intel AX211 Bluetooth driver: btusb v: 0.8 type: USB bus-ID: 3-10:4 Report: btmgmt ID: hci0 rfk-id: 0 state: up address: BC:03:58:5F:3B:CD bt-v: 5.4 lmp-v: 13 Drives: Local Storage: total: 953.87 GiB used: 642.33 GiB (67.3%) ID-1: /dev/nvme0n1 vendor: SK Hynix model: PC801 NVMe 1TB size: 953.87 GiB temp: 38.9 C Partition: ID-1: / size: 76.33 GiB used: 32.93 GiB (43.1%) fs: ext4 dev: /dev/dm-0 mapped: luks-845efd4f-e0a8-46a4-8f74-6da230485d55 ID-2: /boot size: 973.4 MiB used: 439.6 MiB (45.2%) fs: ext4 dev: /dev/nvme0n1p4 ID-3: /boot/efi size: 238.1 MiB used: 24.5 MiB (10.3%) fs: vfat dev: /dev/nvme0n1p1 ID-4: /home size: 743.89 GiB used: 608.94 GiB (81.9%) fs: ext4 dev: /dev/dm-2 mapped: luks-d456693e-52a8-4764-acaf-4d2f62952339 Swap: ID-1: swap-1 type: partition size: 78.11 GiB used: 0 KiB (0.0%) dev: /dev/dm-1 mapped: luks-db5b39a7-3323-43f6-83f3-a59204dd9361 ID-2: swap-2 type: zram size: 8 GiB used: 0 KiB (0.0%) dev: /dev/zram0 Sensors: System Temperatures: cpu: 46.0 C mobo: N/A Fan Speeds (rpm): N/A </code> ==== fich11 ==== <code> System: Host: fic11 Kernel: 5.0.9-301.fc30.x86_64 x86_64 bits: 64 compiler: gcc v: 9.0.1 Desktop: Cinnamon 4.0.10 Distro: Fedora release 30 (Thirty) Machine: Type: Laptop System: Dell product: Latitude 5280 v: N/A serial: <filter> Mobo: Dell model: 07C09D v: A00 serial: <filter> UEFI: Dell v: 1.5.3 date: 08/07/2017 Battery: ID-1: BAT0 charge: 65.0 Wh condition: 65.0/68.0 Wh (96%) model: LGC-LGC8.820 DELL FPT1C79 status: Full CPU: Topology: Dual Core model: Intel Core i5-7300U bits: 64 type: MT MCP arch: Kaby Lake rev: 9 L2 cache: 3072 KiB flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 21696 Speed: 800 MHz min/max: 400/3500 MHz Core speeds (MHz): 1: 793 2: 749 3: 783 4: 763 Graphics: Device-1: Intel HD Graphics 620 vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 Display: x11 server: Fedora Project X.org 1.20.4 driver: modesetting unloaded: fbdev,vesa resolution: 1920x1080~60Hz OpenGL: renderer: Mesa DRI Intel HD Graphics 620 (Kaby Lake GT2) v: 4.5 Mesa 19.0.2 direct render: Yes Audio: Device-1: Intel Sunrise Point-LP HD Audio vendor: Dell driver: snd_hda_intel v: kernel bus ID: 00:1f.3 Sound Server: ALSA v: k5.0.9-301.fc30.x86_64 Network: Device-1: Intel Ethernet I219-LM vendor: Dell driver: e1000e v: 3.2.6-k port: f040 bus ID: 00:1f.6 IF: enp0s31f6 state: up speed: 1000 Mbps duplex: full mac: <filter> Device-2: Intel Wireless 8265 / 8275 driver: iwlwifi v: kernel port: f040 bus ID: 02:00.0 IF: wlp2s0 state: down mac: <filter> Drives: Local Storage: total: 707.56 GiB used: 224.36 GiB (31.7%) ID-1: /dev/nvme0n1 vendor: Toshiba model: KXG50ZNV512G NVMe 512GB size: 476.94 GiB ID-2: /dev/sda type: USB vendor: Corsair model: Voyager SliderX1 size: 230.62 GiB Partition: ID-1: / size: 68.40 GiB used: 9.02 GiB (13.2%) fs: ext4 dev: /dev/nvme0n1p4 ID-2: /boot size: 975.9 MiB used: 123.7 MiB (12.7%) fs: ext4 dev: /dev/nvme0n1p2 ID-3: /home size: 357.27 GiB used: 143.31 GiB (40.1%) fs: ext4 dev: /dev/dm-0 ID-4: /var size: 22.66 GiB used: 1.32 GiB (5.8%) fs: ext4 dev: /dev/nvme0n1p5 ID-5: swap-1 size: 18.59 GiB used: 809.4 MiB (4.3%) fs: swap dev: /dev/nvme0n1p6 Sensors: System Temperatures: cpu: 41.0 C mobo: 36.0 C sodimm: 34.0 C Fan Speeds (RPM): cpu: 0 Info: Processes: 287 Uptime: 21h 36m Memory: 15.53 GiB used: 4.31 GiB (27.7%) Init: systemd runlevel: 5 Compilers: gcc: 9.0.1 Shell: bash v: 5.0.2 inxi: 3.0.32 </code> ==== iiama prolite ==== https://iiyama.com/fr_fr/produits/prolite-b2875uhsu-b1/ home/machine.txt Last modified: 2026/09/25 19:40by lamboringo